|
DST-2002" D-Ring - DRING2
|
|
DST-3003" D-Ring - DRING3
|
List Price: $2.76
Our Price: $3.18
|
|
|
List Price: $3.00
Our Price: $3.16
|
|
|
|
|
|
DST-200 2" D-Ring
|
DST-300 3" D-Ring
|
|
|
|
ICCMSLOR90 - Lad Rck 90* Outsi - ICCICCMSLOR90
|
|
ICCMSLPECK - End Caps - ICCICCMSLPECK
|
List Price: $80.28
Our Price: $59.15
You Save $21.13!
|
|
|
List Price: $10.45
Our Price: $10.45
|
|
|
|
|
|
ICCMSLOR90 - Lad Rck 90* Outside Corner - Ladder rack runway- 90* Outside corner radius bend- Turn section is designed to change the horizontal cable running overhead in a 90* vertical direction to route cables downward to a vertical ladder- 16 Gauge steel- Corrosion resistant finish- Black- 12" Wide- Ladder rack runway addresses every cable routing need for ceiling access, overhead run, vertical cable transport, and rack panel mounted installations
|
ICCMSLPECK - End Caps - End caps- Designed to cover the sharp metal ends on runway and cable posts- Allows a neater appearance- For use with ladder rack runway systems- Black
|
|
|
|
ICCMSLRRBK - Relay Rack Bracke - ICCICCMSLRRBK
|
|
LADDER RACK RUNWAY, 10 FT - ICCICCMSLST10
|
List Price: $36.77
Our Price: $29.02
You Save $7.74!
|
|
|
List Price: $124.17
Our Price: $88.22
You Save $35.95!
|
|
|
|
|
|
ICCMSLRRBK - Relay Rack Bracket - Relay rack bracket- Secures runway sections over cable management and distribution racks- Includes mounting hardware (4 J-bolts)- For use with ladder rack runway systems- 12"- Black
|
LADDER RACK RUNWAY, 10 FT - Ladder rack runway (straight section)- Designed to support horizontal cable running overhead- Easily attaches to all ICC racks- 16 Gauge steel- Corrosion resistant finish- Black- 10' Section- 12" Wide, 2" tall- Ladder rack runway addresses every cable routing need for ceiling access, overhead run, vertical cable transport, and rack panel mounted installations
|
|
|
|
ICCMSLTJSK - T-Junction Splice - ICCICCMSLTJSK
|
|
ICCMSLTWSK - Wall Support Kit - ICCICCMSLTWSK
|
List Price: $20.62
Our Price: $17.36
You Save $3.26!
|
|
|
List Price: $49.88
Our Price: $36.75
You Save $13.13!
|
|
|
|
|
|
ICCMSLTJSK - T-Junction Splice Kit - T-Junction splice kit- Used to fasten runway sections together perpendicularly- Includes mounting hardware- For use with ladder rack runway systems- 2 sets per bag- Black
|
ICCMSLTWSK - Wall Support Kit - Wall support kit- Triangle design for wall mount- Supports runway parallel to the wall- Includes assembly hardware- For use with ladder rack runway systems- Black- Includes triangle support and J-Bolts- 2 Sets per bag
|
|
|
|
ICCMSLVWBK - Wall Bracket - ICCICCMSLVWBK
|
|
Numbering Strips PP 25-48 (5 s - ICCICMPPNLFR2
|
List Price: $21.57
Our Price: $18.16
You Save $3.41!
|
|
|
List Price: $2.95
Our Price: $3.10
|
|
|
|
|
|
ICCMSLVWBK - Wall Bracket - Wall bracket- Used to secure a runway section flat against the wall- For use with ladder rack runway systems- Black- 2 per bag
|
Numbering Strips PP 25-48 (5 shts)
|
|
|
|
Numbering Strips PP 49-72 (5 s - ICCICMPPNLFR3
|
|
Numbering Strips PP 73-96 (5 s - ICCICMPPNLFR4
|
List Price: $2.95
Our Price: $3.10
|
|
|
List Price: $2.95
Our Price: $3.10
|
|
|
|
|
|
|
Numbering Strips PP 49-72 (5 sheets)
|
Numbering Strips PP 73-96 (5 sheets)
|
|
|
|
ICRDSAM15D - DDC CATV Drop Amp - ICCICRDSAM15D
|
|
ICRDSDPA1C - DDC 8Prt Data Mod - ICCICRDSDPA1C
|
List Price: $151.91
Our Price: $103.94
You Save $47.98!
|
|
|
List Price: $28.60
Our Price: $23.33
You Save $5.27!
|
|
|
|
|
|
|
ICRDSAM15D - DDC CATV Drop Amp Module - CATV drop amplifier module- Features a low noise level and 15dB gain with a 54MHz-1GHz bandwidth- Passive return path with a 5MHz-40MHz bandwidth- Mounting bracket required (not included)- For use with the Deluxe distribution centers (DDC)
|
ICRDSDPA1C - DDC 8Prt Data Module - Deluxe data module- Terminates up to 8 Category 5E data lines- Non-bridged- For use with Deluxe distribution centers (DDC)
|
|
|
|
2" J Hooks - JHOOK2
|
|
630LCCU-2F-50 2 Line Wall DSL - SE630LC2F50
|
List Price: $4.73
Our Price: $4.98
|
|
|
List Price: $7.58
Our Price: $7.98
|
|
|
|
|
|
2" J Hooks - J Hooks- 2" Hook size- Allow you to keep all of your low voltage cables and wires neat and organized- Load capacity: 30 lbs. JHOOK2
|
630LCCU-2F-50 2 Line Wall DSL Filter
|
|
|
|
Wall Mount DSL Filter - SE630LCCU50
|
|
Outdoor POTS Splitter - SE649A1
|
List Price: $6.56
Our Price: $6.90
|
|
|
List Price: $44.18
Our Price: $33.71
You Save $10.47!
|
|
|
|
|
|
|
Wall Mount DSL Filter
|
Outdoor POTS Splitter - Suttle outdoor DSL POTS (Plain Old Telephone Service) splitter - Allows voice and data signals to travel over the same telephone line and be separated at the customer premise- Splits the incoming signal to provide separate outputs for filteredvoice (phone) and ADSL (data) in the form of screw terminals- Designed to be mounted on a wall or conduit next to a Network Interface Device (NID)- Outdoor housing for protection from environmental conditions- Mounts to wall or conduit- Terminals for Network, Voice, and Data- ANSI T1.413 compliant- FCC Registered; Complies with Part 68, FCC RulesSE649A1
|
|
|
|
In-line DSL Filter w/ Splitter - SE900LCCS50
|
|
TEC Dial Stop - TEC040
|
List Price: $4.75
Our Price: $5.00
|
|
|
List Price: $38.00
Our Price: $30.00
You Save $8.00!
|
|
|
|
|
|
|
In-line DSL Filter w/ Splitter - Suttle in-line DSL filter with splitter- The In-line Adapter connects between the wall jack and voice device (e.g. phone, fax, answering machine, Caller ID) providing both an unfiltered DSL jack for DSL connection and a filtered jack for a single line of voice device communications- Eliminates all erratic impedance from telephone equipment that interfere with DSL communications- FCC Registered; Complies with Part 68- ANSI T1. 421- Material is flame retardant thermoplastic compliant with UL 94V-0- Minimum 50 micro-inch of gold and nickel- Small compact design- Customer installableSE900LCCS50
|
TEC Dial Stop
|
|
|
